TEC SEAL is specially formulated to seal and protect ceramic tile, limestone, sandstone, concrete, terrazzo, marble, granite, stucco, grout and other stone and masonry surfaces. Not a conventional latex sealer, but an impregnating sealer that protects the interior of the stone or masonry, repelling soils, liquids and oils that can discolor or stain. This product is for professional use only.
▪ Preserves the natural appearance while protecting from within the pores of the substrate. Traditional seals and finishes change the appearance of the stone, darkening or adding gloss to the surface; TEC SEAL provides an invisible protective barrier, but leaves the surface natural in appearance.
▪ Repels soils and stains - floors sealed with TEC SEAL easily repel spilled beverages, soils, and especially oils and oily soils, making the surface easy and economical to maintain. All of the TEC SEAL is absorbed and locked into the pores of the stone or masonry to retard penetration of liquids and soils.
▪ Preserves the natural slip resistance - properly installed TEC SEAL leaves no material on the surface, so in many cases slip resistance underfoot will be improved, thereby increasing safety.
Please see Product Data sheet for full Preparation, Application and Maintenance Instructions, as well as Coverage Rate variations.
|COLOR:||Opaque, white (dries to transparent)|
|FLASH POINT:||None (C.O.C. Method)|
|DRYING TIME (at 68° F., 50% RH):||20 to 30 minutes|
|CURE TIME (at 68° F., 50% RH):||24 to 48 hours|
|V.O.C. CONTENT:||29 g/l|
|VAPOR PERMEABILITY:||50% minimum|
|HMIS RATING:||Health = 1 Flammability = 0 Physical Hazard = 0|
|POLYMER TYPE:||Proprietary Reactive Resin System|
|SPECIFIC GRAVITY / DENSITY:||1.0 / 8.32 pounds per gallon|
|PACKAGE SIZES:||4 x 1 gallon jugs|
|5 gallon pails|
|55 gallon drums rev.|