TILE BRITE is an acid based scum and scale remover formulated to thoroughly penetrate and remove soap scum, calcium deposits and rust stains from bath tubs, fixtures, shower tile, drinking fountains, cement, glass and chrome. TILE BRITE will not harm these surfaces when used as directed (cement and grout will be mildly etched).
TILE BRITE may be used undiluted if proper pretesting confirms the need for using it full strength; most applications will require diluting with 2 to 10 parts water. Dilute with up to 10 parts water for very light scale and soap scum. Dilute with up to 5 parts water for efflorescence, heavy lime scale and rust deposits. Apply to surface with acid pump-up sprayer, trigger sprayer, damp rag or sponge. Neutralize using properly diluted SURTEC HC-150 or SC-210, followed by thorough rinsing with clean water.
|DILUTION RATE:||1:10 to undiluted|
|METHOD OF APPLICATION:||Acid-proof pump-up or trigger sprayer|
|pH (Concentrate):||0.7 ± 0.2|
|HMIS RATING:||Health = 2 Flammability = 0 Physical Hazard = 0|
|SPECIFIC GRAVITY / DENSITY:||1.1 / 9.2 pounds per gallon|
|FLASH POINT:||None (C.O.C. Method)|
|SURFACE TENSION:||29 dynes per cm. (at 1:10 dilution)|
|V.O.C. CONTENT:||Less than 1% (Concentrate)|
|SOLUBILITY IN WATER:||100% (hard, soft and/or deionized water)|
|FREEZE/THAW STABILITY:||Minimum 3 cycles (A.S.T.M. Test D-3209-82)|
|SHELF LIFE:||Minimum 1 year from date of sale|
|CONTAINER SIZES AVAILABLE:||4 x 1 gallon jugs|
|5 gallon pail|
|55 gallon drum|