SP-658 GRAFFITI BARRIER

ENVIRONMENTALLY PREFERRED WATERBORNE LOW GLOSS LOW VOC URETHANE/ACRYLIC PROTECTIVE COATING

$135.89$524.93

Clear
SKU: N/A Category:
Contact

Description

GRAFFITI BARRIER VOC is a low gloss, low VOC, high performance, two-component urethane/acrylic clear coating formulated for graffiti protection of concrete and masonry surfaces.
GRAFFITI BARRIER VOC is suitable for application to concrete, stucco, artificial stone, cinder block and similar surfaces. In combination with GRAFFITI BUSTER VOC remover, GRAFFITI BARRIER VOC offers protection from spray paints, marker inks, crayon, etc.

GRAFFITI BARRIER VOC is chemically resistant, highly durable, and cures hard within 24 hours of application and at ultimate chemical resistance in 48 hours. The low odor formula is designed to allow application without disruption of normal operations - ideal for areas where solvent odors from traditional acrylic or polyurethane coatings are not tolerated.

GRAFFITI BARRIER VOC offers enhancement of the substrate similar to solventborne sealers, provides a 2 hour pot life, and is easy to apply. An onsite mock-up is highly recommended to guarantee compatibility of GRAFFITI BUSTER VOC with the substrate and should be offered to the customer for approval of the appearance.

Directions

Please see Product Data sheet for full Surface Preparation, Mixing, Application, and Graffiti Removal Instructions, as well as Coverage Rate variations and Dry Times.

Specifications

COLOR: Part A: White, milky; Part B: Clear
ODOR: Mild
HMIS RATING: Health = 2 Flammability = 1 Physical Hazard = 1
VOC CONTENT: 41 grams/liter
SOLIDS: 51%
SPECIFIC GRAVITY/DENSITY (mixed): 1.07 /8.9 lbs. per gallon
MIX RATIO: 3:1 by volume (72.9:27.1 by weight)
VISCOSITY (mixed): 50 - 100 cps. (Brookfield, spindle #3, 50 rpm)
INDUCTION TIME AFTER MIXING: 30 minutes
POT LIFE: 2 hours
EXTERIOR DURABILITY: Excellent
WATER RESISTANCE: Excellent
CHEMICAL RESISTANCE: Very Good
FLASH POINT: None (C.O.C. Method)
GLOSS: Less than 25 (ASTM Test D-523, 60°)
SAFETY (under foot): Exceeds slip resistance requirements (ASTM Test D-2047
PACKAGE SIZES: 1 gallon kit (3 qts. Part A, 1 qt. Part B)
4 gallon kit (3 gals. Part A, 1 gal. Part B) rev.
x
Name(Required)
Hidden
X

Welcome to Surtec! Subscribe to our newsletter for access to exclusive offers and information.

Name(Required)