A two-part stripping system that simultaneously strips and destains rubber tile flooring. The stripper component (TRUE COLOR STRIPPER) and a stain removing component (TRUE COLOR ACTIVATOR), are combined with water to form a solution which safely removes old floor finish and seal without discoloration (yellowing) of the rubber tile.
The TRUE COLOR System can be used safely for rubber tile, as well as other resilient tile flooring, including vinyl, composition vinyl, asphalt or linoleum. Masonry, concrete and stone tile can also be safely treated with the TRUE COLOR System.
Apply solution to floor, keeping the area wet for a minimum of twenty minutes. Scrub with a floor machine and strip pads or brushes. Vacuum up used solution, then rinse twice with copious amounts of clean, cold water. Allow to dry, then high speed buff, dust mop, and apply 2 coats of SURTEC FS-600 and 3 coats of ULTRA II, allowing each coat to dry before applying subsequent coats. High speed buff each coat for optimum results.
See Product Data sheet for Mixing Directions and Dilution Ratios.
|APPEARANCE:||White granular powder|
|HMIS RATING:||Health =1 Flammability = 0 Physical Hazard = 1|
|SOLUBILITY IN WATER:||140 grams per liter|
|SAFE FOR USE ON:||Nylon, rayon, olefins, and other synthetic and natural fibers unaffected by water.|
|DILUTION RATE:||3% (see Data sheet for detailed mixing directions)|
|PACKAGE SIZE:||1.5 pound jar|
|7.5 pound pail|