A two-part stripping system that simultaneously strips and destains rubber tile flooring. The formula contains a stripper component (TRUE COLOR STRIPPER) and a stain removing component (TRUE COLOR ACTIVATOR), which are combined with water to form a solution which safely removes old floor finish and seal without discoloration (yellowing) of the rubber tile.
The TRUE COLOR System can be used safely for rubber tile, as well as other resilient tile flooring, including vinyl, composition vinyl, asphalt or linoleum. Masonry, concrete and stone tile can also be safely treated with the TRUE COLOR System.
Apply solution to floor, keeping the area wet for a minimum of twenty minutes. Scrub with a floor machine and strip pads or brushes. Vacuum up used solution, then rinse twice with copious amounts of clean, cold water. Allow to dry, then high speed buff, dust mop, and apply 2 coats of SURTEC FS-600 and 3 coats of ULTRA II, allowing each coat to dry before applying subsequent coats. High speed buff each coat for optimum results.
See Product Data sheet for Mixing Directions and Dilution Ratios.
|12.5 + 0.2 (1:10 dilution)|
|HMIS RATING:||Health = 2 Flammability = 0 Physical Hazard = 0|
|FLASH POINT:||None (C.O.C. Method)|
|DILUTION USE RANGE:||1:6 to 1:15|
|DENSITY:||8.4 pounds per gallon|
|SOLUBILITY IN WATER:||100% (hard, soft and/or deionized water)|
|SHELF LIFE:||Minimum 1 year from date of sale|
|FREEZE/THAW STABILITY:||Minimum 3 cycles (A.S.T.M. Test D-3209-82)|
|PACKAGE SIZES||4 x 1 gallon jugs|
|5 gallon Twin Pack (2 x 2.5 gal. bottles/box)|
|55 gallon drums|