FP-575 is a high solids floor polish designed to achieve maximum gloss quickly and maintain it for extra-long periods of time. Each coat provides a clear, durable film for the protection of floor surfaces. The high solids, metal interlock system allows a floor to achieve beauty and protection rapidly. FP-575 is the product of choice for heavy foot traffic, low maintenance environments such as airports, transit stations, restaurants and convenience stores. FP-575 exceeds the Coefficient of Friction safety standards of ASTM Designation D-2047.
APPLICATION - Use standard application procedures with a good quality rayon or synthetic blend string mop, or flat pad microfiber, applying thin to medium coats of FP-575. Allow 30 minutes of dry time between coats or before opening to traffic. Three or more coats in one application period are possible with FP-575 and, on a bare, stripped floor, may be required to achieve the highest level of gloss.
ROUTINE MAINTENANCE - Use SURTEC HC-150 or LF-150 Heavy Duty Cleaners at 1 or 2 ozs. per gallon of water for routine maintenance by damp mopping or scrubbing. Occasional high speed buffing of FP-575 will prolong the life of the polish and increase safety and durability, as well as increase shine and appearance. A propane buffer equipped with natural hog hair pads will achieve excellent buffing results, but any good quality high speed (1000+ rpm) buffer will achieve suitable results.
RECOAT - Scrub the floor with a low speed buffer or automatic scrubber and blue or green (medium scrub) pads using HC-150 or LF-150 Heavy Duty Cleaners at a dilution of 2 to 4 ozs. per gallon of water to achieve a clean surface. Rinse the floor with clean water and let dry, then apply one or more coats of FP-575, allowing each coat to dry before applying subsequent coats. Upon drying, the last coat may be high speed buffed if desired.
STRIPPING - If stripping is necessary, use SURTEC L.O.S. or SUPER STRIP according to label directions.
|COLOR:||Milk-white, stable emulsion, dries clear|
|pH:||8.1 ± 0.2|
|SPECIFIC GRAVITY/DENSITY:||1.04 / 8.7 pounds per gallon|
|FLASH POINT:||None (C.O.C. Method)|
|VOC CONTENT:||Less than 1% by weight|
|HMIS RATING:||Health = 1 Flammability = 0 Physical Hazard = 0|
|GLOSS:||93 (A.S.T.M. Test D-523, 60°)|
|DRYING TIME:||30 minutes at 20°C. (68°F.), 50% relative humidity|
|COVERAGE:||2000 sq. ft. per gallon (average coverage on a sealed floor)|
|LEVELING:||Excellent (A.S.T.M. Test D-2801)|
|POWDERING RESISTANCE:||Excellent (A.S.T.M. Test D-2048-82)|
|RECOATABILITY:||Excellent (A.S.T.M. Test D-3153-78)|
|SAFETY (slip resistance):||Exceeds requirements (A.S.T.M. Test D-2047)|
|PACKAGE SIZES:||4 x 1 gallon jugs|
|5 gallon Twin Pack (2 x 2.5 gal. bottles/box)|
|55 gallon drums|