FP-541 ULTRA 3

ULTRA 3 combines innovative formulating with an advanced polymer system to create a floor polish which produces exceptional gloss, burnish response, durability and safety. ULTRA 3 produces optimum results when maintained by Ultra High Speed Buffing. ULTRA 3 offers exceptional leveling with superior surface adhesion and long-lasting shine. In addition to outstanding floor protection and appearance, a properly maintained ULTRA 3 floor can mean significant material and labor savings from a less frequent need to recoat or strip.

APPLICATION - Use standard application procedures with a good quality rayon or synthetic blend string mop taking great care to apply only thin to medium coats. Upon drying, high speed buff the last coat applied for optimum results. High speed buffing ULTRA 3 will prolong the life of the polish and increase safety and durability, as well as increase shine and appearance. A propane buffer equipped with THERMAL GLOSS pads will achieve excellent buffing results, but any good quality high speed (1000+ rpm) buffer will achieve suitable results.

ROUTINE MAINTENANCE - Use SURTEC LF-150 heavy duty floor cleaner or FLOOR SHINE High Speed Floor Maintainer at 1 or 2 ozs. per gallon of water for damp mopping or scrubbing prior to high-speed buffing.

RECOAT - Scrub the floor with a low speed buffer or automatic scrubber and blue or green (medium scrub) pads using LF-150 Heavy Duty Cleaner at a dilution of 2 to 4 ozs. per gallon of water to achieve a clean surface. Rinse the floor with clean water and let dry, then apply one or more coats of ULTRA 3, allowing each coat to dry completely before applying the next coat. Upon drying, high speed buff the last coat applied for optimum results.

STRIPPING - If stripping is necessary, use SURTEC L.O.S., SUPER STRIP or ULTRA STRIP according to label directions.