FM-160 FLOOR SHINE MAINTAINER

FLOOR SHINE uses new polymer technology to deliver a product that is both a floor maintainer and a gloss extender, to clean and prepare the polish film for Ultra High Speed Buffing. FLOOR SHINE works three ways simultaneously: it cleans the floor, hardens the finish, and brightens the gloss. Slip resistance and safety are also improved, and recoat and stripping frequencies are reduced, resulting in increased economy in maintenance.
As a gloss extender, FLOOR SHINE can be used to quickly rejuvenate high traffic wear areas, increasing the gloss and durability of the floor finish, leaving a freshly recoated appearance without the problems associated with constant recoating. Best results are obtained when used on floors that have a good foundation of SURTEC STATEMENT, ULTRA II, DURASHINE or other SURTEC high speed floor polishes, and are maintained with a high(or ultra high) speed maintenance program.

As a routine floor polish maintainer: Mop floors or scrub with automatic scrubber using FLOOR SHINE at 1 to 2 ounces per gallon of warm water. Allow to dry. Buff all floor areas with a high speed buffer.

As a gloss extender: First, clean the floor with 2 ounces of SURTEC LF-150 per gallon of water. Mix 1 part FLOOR SHINE with 10 parts water, then wet mop the entire floor, applying the FLOOR SHINE solution in the same manner as applying floor finish. Allow to dry. Buff all floor areas with a high speed buffer. For best results, use a buffer that turns 1000 RPM or higher.