CS-676 STONE SEAL

SURTEC STONE SEAL is a unique waterborne sealer that effectively seals the pores of the concrete, while providing a high gloss base for any SURTEC waterborne topical floor polish or coating. By sealing the concrete, STONE SEAL provides excellent adhesion, and protects topical finishes from the harsh alkalinity of the concrete. STONE SEAL may also be used as a seal over other masonry or ceramic tile surfaces, providing excellent adhesion for finishes to these surfaces. STONE SEAL may also be used by itself as a topical seal, providing a durable, high gloss, slip resistant surface with excellent durability under normal foot traffic.

STONE SEAL is not recommended for use on dense, non-porous stone or masonry surfaces, such as slate or quarry tile, unless tested prior to application. Hard trowelled concrete may have to be lightly mechanically ground or acid-etched before application.

STONE SEAL complies with all Federal, CA and OTC VOC regulations. VOC content = 44 g/l.

This product is for professional use only.

Surface must be thoroughly cleaned and rinsed. Use SURTEC SC-210 for fast, efficient removal of dirt and oils. Do not seal over old floor seal or dirt. Etching of concrete may be necessary if the concrete surface is hard troweled and dense or if calcium salts are present; if etching, use properly diluted SURTEC SUPER ETCH or SUPER ETCH PLUS. Always test an inconspicuous area prior to use.

Using standard floor finish application techniques, apply thin to medium coats with a mop, microfiber applicator or lambswool applicator. Allow at least 30 minutes dry time per coat. Two coats are generally required for complete sealing and for a consistent appearance.

STONE SEAL can be maintained using HC-150, or other SURTEC floor maintenance cleaner. If it becomes necessary to strip, SURTEC ULTRA STRIP will efficiently break down and remove the sealer.

Please see Product Data sheet for Dry Time variations & Coverage Rates.