CS-672 STONE COAT

HIGH SOLIDS, HIGH GLOSS, LOW VOC INTERIOR CONCRETE, CERAMIC TILE & MASONRY SEALER

$41.98$2,226.40

Clear
SKU: N/A Category:
Contact

Description

SURTEC STONE COAT is a unique, high solids waterborne sealer that effectively seals the pores of the concrete, while providing a high gloss base for any SURTEC waterborne topical floor polish or coating. By sealing the concrete, STONE COAT provides excellent adhesion, and protects topical seals from the harsh alkalinity of the concrete. STONE COAT may also be used as a seal over other masonry or ceramic tile surfaces, providing excellent adhesion to these surfaces. STONE COAT may also be used by itself as a topical seal, providing a durable, high gloss, slip resistant surface with excellent durability under normal foot traffic.

STONE COAT is not recommended for use on dense, non-porous stone or masonry surfaces, such as slate or quarry tile, unless tested prior to application. Hard trowelled concrete may have to be lightly mechanically ground or acid-etched before application.

STONE COAT complies with all Federal, CA and OTC VOC regulations. VOC content = 44 g/l.

This product is for professional use only.

Directions

Surface must be thoroughly cleaned and rinsed. Use SURTEC SC-210 for fast, efficient removal of dirt and oils. Do not seal over old floor seal or dirt. Etching of concrete may be necessary if the concrete surface is hard troweled and dense or if calcium salts are present; if etching, use properly diluted SURTEC SUPER ETCH or SUPER ETCH PLUS. Always test an inconspicuous area prior to use.

Using standard floor finish application techniques, apply thin to medium coats with a mop, microfiber applicator or lambswool applicator. Allow at least 30 minutes dry time per coat. Two coats are generally required for complete sealing and/or for a consistent appearance.

STONE COAT can be maintained using HC-150, or other SURTEC floor maintenance cleaner. If it becomes necessary to strip, SURTEC ULTRA STRIP will efficiently break down and remove the coating.

Please see Product Data sheet for Dry Time variations & Coverage Rates.

Specifications

COLOR: Milk white, stable emulsion, dries clear
pH: 8.25 ± 0.2
SPECIFIC GRAVITY/DENSITY: 1.03 / 8.6 pounds per gallon
FLASH POINT: None (C.O.C. Method)
VOC CONTENT: 44 g/l
HMIS RATING: Health = 1 Flammability = 0 Physical Hazard = 0
REFRACTOMETER SOLIDS: 30%
GLOSS: 98 (A.S.T.M. Test D-523, 60°)
RECOATABILITY: Excellent (A.S.T.M. Test D-3153-78)
SAFETY (slip resistance): Exceeds requirements (A.S.T.M. Test D-2047)
PACKAGE SIZES: 4 x 1 gallon jugs
5 gallon pails
55 gallon drums
x
Name(Required)
Hidden
X

Welcome to Surtec! Subscribe to our newsletter for access to exclusive offers and information.

Name(Required)