CS-670 AQUAPRO 100

INTERIOR/EXTERIOR LOW VOC WATER RESISTANT CONCRETE SEALER

$26.17$1,356.85

Clear

SKU: N/A Category:
Contact

Description

AQUAPRO 100 is a low VOC, semi-gloss waterborne acrylic sealer with excellent durability, as well as oil, water and soil resistance. AQUAPRO 100 may be used as a sealer for indoor and outdoor hard surfaces, such as concrete, masonry, terrazzo and porous stone tile. For all areas requiring the highest water resistance, AQUAPRO 100 will not blush from standing water, will not yellow, haze or flake, and features a low temperature cure requirement (40° F min).

AQUAPRO 100 exceeds the Coefficient of Friction Safety Standard ASTM Designation D-2047. AQUAPRO 100 complies with all Federal, CA and OTC VOC regulations. VOC content = 99 g/l.

This product is for professional use only.

Directions

Surface must be thoroughly cleaned and rinsed; use SURTEC SC-210 for fast, efficient removal of dirt and oils. Etching of the concrete may be necessary if the concrete surface is hard troweled and dense or if calcium salts are present; if etching is required, use properly diluted SURTEC SUPER ETCH or SUPER ETCH PLUS. Always test an inconspicuous area prior to use.

On smooth, prepared surfaces AQUAPRO 100 may be applied using standard floor finish application techniques, applying thin to medium coats with a finish mop, microfiber applicator or lambswool applicator. On rougher surfaces including broom-troweled and stamped concrete, AQUAPRO 100 may be applied by pump-up spray, followed by brooming with a soft bristled brush. Paint rollers are not recommended due to excessive foam generation. Allow at least 30 to 60 minutes dry time per coat. Apply at least two coats for complete sealing of the surface, and for a uniform appearance.

AQUAPRO 100 can be maintained using SURTEC HC-150, or other SURTEC floor maintenance cleaner. If it becomes necessary to strip, SURTEC ULTRA STRIP will efficiently break down and remove the coating.

Please see Product Data sheet for Dry Time variations & Coverage Rates.

Specifications

COLOR: Milk white, stable emulsion, dries clear
ODOR: Sweet
pH: 8.4 ± 0.2
SPECIFIC GRAVITY/DENSITY: 1.01 / 8.5 pounds per gallon
FLASH POINT: None (C.O.C. Method)
VOC CONTENT: 99 g/l
HMIS RATING: Health = 1 Flammability = 0 Physical Hazard = 0
REFRACTOMETER SOLIDS: 18%
RECOATABILITY: Excellent (A.S.T.M. Test D-3153-78)
SAFETY (slip resistance): Exceeds requirements (A.S.T.M. Test D-2047)
PACKAGE SIZES: 4 x 1 gallon jugs
5 gallon pails
55 gallon drums
x
Name(Required)
Hidden
X

Welcome to Surtec! Subscribe to our newsletter for access to exclusive offers and information.

Name(Required)